Boston Liquid Thread Sealant 50g

Boston Liquid Thread Sealant is an anaerobic sealant formulated to seal metal threads on gas and water pipes. It cures in the absence of air once confined between metal surfaces, creating a reliable, leak resistant seal.

Why choose this sealant

Seals metal threaded fittings for gas and water systems
Fast handling strength in 10 to 20 minutes at room temperature
Full cure in 24 hours for long lasting performance
Resists vibration and helps prevent loosening
Approved for gas service and type tested for contact with potable water

Where to use

Metal to metal threaded connections on gas lines and appliances
Metal to metal threaded connections on cold and warm water pipes up to 55°C

Not suitable for

Plastic, glass, or rubber parts
Non threaded gaps or joints exposed to air
Continuous steam temperatures above 135°C

Directions

Remove oil and contamination from threads. Ensure parts are clean and dry.
Apply sealant to one surface, covering 2 to 3 thread rotations.
Assemble threads. Wipe off any excess sealant immediately.
Allow 10 to 20 minutes for initial cure before pressurising. Allow 24 hours for full cure.
Disassembly can be performed using standard hand tools.

Good to know

Anaerobic sealants cure when air is excluded between metal parts. Sealant exposed to air will not cure.
Packaging is larger than contents to prevent in bottle curing. Net content is 50g.
Always wipe away excess to avoid any metallic taste from uncured material in potable water systems.
Apply with good ventilation. If contact occurs with eyes or skin, flush with clean water immediately.
Store in a cool, dry place. Keep out of reach of children.

Approvals and compliance

Approved by the Australian Gas Association (Cert. No. 7583, Class III, 2000 kPa)
Type Tested AS/NZS 4020 (PTT40067, SAI Global)

Specifications

Chemistry	Anaerobic thread sealant for metal parts
Pack size	50g
Initial cure	10 to 20 minutes
Full cure	24 hours
Gas temperature range	-10°C to +135°C
Water temperature range	Up to 55°C
Pressure class	Class III, up to 2000 kPa
Substrates	Metal to metal threads only

What is included

1 x Boston Liquid Thread Sealant 50g tube.

For: Automotive

T-Rex Brute Force Duct Tape The Strongest Holds 700lbs

Boston General Purpose Liquid Sealant 50g