✨ New Arrivals Just Dropped!Explore
Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml
HomeStore

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Take on interior and exterior sealing with a professional grade hybrid MS polyurethane. This single component sealant delivers a flexible, durable seal on common building substrates and is suitable for a wide range of construction and maintenance tasks.

Key benefits

  • Very low VOC and isocyanate free
  • UV resistant for long term outdoor performance
  • High flexibility to accommodate joint movement
  • Excellent adhesion on properly prepared porous and non porous surfaces
  • Easy to gun, tool and clean up

Typical applications

  • Construction and expansion joints
  • Perimeter sealing around windows and doors
  • Roofing and cladding laps, flashings and penetrations
  • General gap sealing in wet and dry areas

Suitable substrates

  • Concrete, masonry, brick and render
  • Timber and fibre cement
  • Metals and coated metals
  • Many plastics* and glass

*Always pre test for compatibility and adhesion.

Surface preparation

  • Surfaces must be clean, dry, sound and free of dust, oil, release agents and loose material.
  • Remove old sealant and contaminants. Abrade dense or glossy surfaces if required.
  • Use suitable primer if specified for difficult or highly porous substrates.
  • Mask edges for neat joints and install closed cell backing rod where needed to control joint depth.

Application

  1. Cut nozzle to required bead size and load cartridge into a quality caulking gun.
  2. Gun a continuous bead into the joint ensuring full contact with sides and backing.
  3. Tool off with a moistened spatula for a smooth finish before skin forms.
  4. Protect from water and disturbance during initial cure.

Clean up

  • Clean tools and fresh spills promptly.
  • Once cured, remove by mechanical means.

Good to know

  • Low odour formulation suitable for indoor use with ventilation.
  • Paintable with many water based coatings once skinned and cured. Always test first.
  • Store upright in a cool, dry place. Keep out of direct sunlight.

Safety

  • Wear suitable gloves and eye protection.
  • Avoid contact with skin and eyes. If contact occurs, rinse with clean water.
  • Refer to the product Safety Data Sheet for full precautions.

What’s in the box

  • 1 x 300ml cartridge
  • 1 x application nozzle
$8.68
Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml
$8.68

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Take on interior and exterior sealing with a professional grade hybrid MS polyurethane. This single component sealant delivers a flexible, durable seal on common building substrates and is suitable for a wide range of construction and maintenance tasks.

Key benefits

  • Very low VOC and isocyanate free
  • UV resistant for long term outdoor performance
  • High flexibility to accommodate joint movement
  • Excellent adhesion on properly prepared porous and non porous surfaces
  • Easy to gun, tool and clean up

Typical applications

  • Construction and expansion joints
  • Perimeter sealing around windows and doors
  • Roofing and cladding laps, flashings and penetrations
  • General gap sealing in wet and dry areas

Suitable substrates

  • Concrete, masonry, brick and render
  • Timber and fibre cement
  • Metals and coated metals
  • Many plastics* and glass

*Always pre test for compatibility and adhesion.

Surface preparation

  • Surfaces must be clean, dry, sound and free of dust, oil, release agents and loose material.
  • Remove old sealant and contaminants. Abrade dense or glossy surfaces if required.
  • Use suitable primer if specified for difficult or highly porous substrates.
  • Mask edges for neat joints and install closed cell backing rod where needed to control joint depth.

Application

  1. Cut nozzle to required bead size and load cartridge into a quality caulking gun.
  2. Gun a continuous bead into the joint ensuring full contact with sides and backing.
  3. Tool off with a moistened spatula for a smooth finish before skin forms.
  4. Protect from water and disturbance during initial cure.

Clean up

  • Clean tools and fresh spills promptly.
  • Once cured, remove by mechanical means.

Good to know

  • Low odour formulation suitable for indoor use with ventilation.
  • Paintable with many water based coatings once skinned and cured. Always test first.
  • Store upright in a cool, dry place. Keep out of direct sunlight.

Safety

  • Wear suitable gloves and eye protection.
  • Avoid contact with skin and eyes. If contact occurs, rinse with clean water.
  • Refer to the product Safety Data Sheet for full precautions.

What’s in the box

  • 1 x 300ml cartridge
  • 1 x application nozzle

Product Information

Shipping & Returns

Description

Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml

Take on interior and exterior sealing with a professional grade hybrid MS polyurethane. This single component sealant delivers a flexible, durable seal on common building substrates and is suitable for a wide range of construction and maintenance tasks.

Key benefits

  • Very low VOC and isocyanate free
  • UV resistant for long term outdoor performance
  • High flexibility to accommodate joint movement
  • Excellent adhesion on properly prepared porous and non porous surfaces
  • Easy to gun, tool and clean up

Typical applications

  • Construction and expansion joints
  • Perimeter sealing around windows and doors
  • Roofing and cladding laps, flashings and penetrations
  • General gap sealing in wet and dry areas

Suitable substrates

  • Concrete, masonry, brick and render
  • Timber and fibre cement
  • Metals and coated metals
  • Many plastics* and glass

*Always pre test for compatibility and adhesion.

Surface preparation

  • Surfaces must be clean, dry, sound and free of dust, oil, release agents and loose material.
  • Remove old sealant and contaminants. Abrade dense or glossy surfaces if required.
  • Use suitable primer if specified for difficult or highly porous substrates.
  • Mask edges for neat joints and install closed cell backing rod where needed to control joint depth.

Application

  1. Cut nozzle to required bead size and load cartridge into a quality caulking gun.
  2. Gun a continuous bead into the joint ensuring full contact with sides and backing.
  3. Tool off with a moistened spatula for a smooth finish before skin forms.
  4. Protect from water and disturbance during initial cure.

Clean up

  • Clean tools and fresh spills promptly.
  • Once cured, remove by mechanical means.

Good to know

  • Low odour formulation suitable for indoor use with ventilation.
  • Paintable with many water based coatings once skinned and cured. Always test first.
  • Store upright in a cool, dry place. Keep out of direct sunlight.

Safety

  • Wear suitable gloves and eye protection.
  • Avoid contact with skin and eyes. If contact occurs, rinse with clean water.
  • Refer to the product Safety Data Sheet for full precautions.

What’s in the box

  • 1 x 300ml cartridge
  • 1 x application nozzle
Crommelin Hybrid MS Polyurethane Flexible Sealant 300ml | Glues Australia