Loctite Muffler and Tailpipe Repair Bandage Withstands 260 degrees
IMPREGNATED WITH E-POX E RESIN WITHSTANDS HEAT UP TO 260°C
Repairs engine exhaust systems of all types of cars, trucks, boats, motorcycles, and stationary engines.
DIRECTIONS FOR USE:
1. Clean off loose rust and dirt from the damaged area of muffler or tailpipe with sandpaper or a steel wire brush. Wear goggles as eye protection
2. Warm-up muffler, peel back the red overlay on both sides of bandage and then wrap the clear center around the damaged area- overlapping 10-15mm
3. Run the motor or drive for approximately 30 minutes. The heat from the exhaust chemically welds the epoxy in the bandage into one solid protective coating NOTE: For small repairs use Loctite Muffler Putty (MP2). When repairing large holes use a piece of sheet metal ie beer can, wired between the hole and the bandage as reinforcement. When assembling new pipes and mufflers use Loctite Exhaust Joint Sealer (JS1), It guarantees carbon-monoxide leakproof joints For large mufflers more than one bandage may be required
Original: $4.34
-65%$4.34
$1.52Loctite Muffler and Tailpipe Repair Bandage Withstands 260 degrees
IMPREGNATED WITH E-POX E RESIN WITHSTANDS HEAT UP TO 260°C
Repairs engine exhaust systems of all types of cars, trucks, boats, motorcycles, and stationary engines.
DIRECTIONS FOR USE:
1. Clean off loose rust and dirt from the damaged area of muffler or tailpipe with sandpaper or a steel wire brush. Wear goggles as eye protection
2. Warm-up muffler, peel back the red overlay on both sides of bandage and then wrap the clear center around the damaged area- overlapping 10-15mm
3. Run the motor or drive for approximately 30 minutes. The heat from the exhaust chemically welds the epoxy in the bandage into one solid protective coating NOTE: For small repairs use Loctite Muffler Putty (MP2). When repairing large holes use a piece of sheet metal ie beer can, wired between the hole and the bandage as reinforcement. When assembling new pipes and mufflers use Loctite Exhaust Joint Sealer (JS1), It guarantees carbon-monoxide leakproof joints For large mufflers more than one bandage may be required
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
IMPREGNATED WITH E-POX E RESIN WITHSTANDS HEAT UP TO 260°C
Repairs engine exhaust systems of all types of cars, trucks, boats, motorcycles, and stationary engines.
DIRECTIONS FOR USE:
1. Clean off loose rust and dirt from the damaged area of muffler or tailpipe with sandpaper or a steel wire brush. Wear goggles as eye protection
2. Warm-up muffler, peel back the red overlay on both sides of bandage and then wrap the clear center around the damaged area- overlapping 10-15mm
3. Run the motor or drive for approximately 30 minutes. The heat from the exhaust chemically welds the epoxy in the bandage into one solid protective coating NOTE: For small repairs use Loctite Muffler Putty (MP2). When repairing large holes use a piece of sheet metal ie beer can, wired between the hole and the bandage as reinforcement. When assembling new pipes and mufflers use Loctite Exhaust Joint Sealer (JS1), It guarantees carbon-monoxide leakproof joints For large mufflers more than one bandage may be required
