Ryobi 18V ONE+ EZ Reach Pole Pruner Attachment 10” Tool Only - for High Branches
Ryobi 18V ONE+ EZ Reach
Pole Pruner Attachment 10"
Cut high branches safely from the ground. The 10 inch bar and chain attachment connects to any compatible Ryobi EZ Reach power head and extends your cutting reach up to 3.5 metres, keeping your feet firmly planted while getting the job done cleanly overhead.
The Ryobi 18V ONE+ EZ Reach Pole Pruner Attachment is a 10 inch bar and chain head designed to work with the Ryobi EZ Reach expandable power head system. It mounts to the end of the EZ Reach pole and allows you to cut branches up to approximately 20cm in diameter at heights of up to 3.5 metres, all from a safe standing position at ground level.
This is an attachment only. It requires a compatible Ryobi EZ Reach power head and pole to operate. If you already own a Ryobi EZ Reach power head, this attachment expands your system with pruning saw capability without the need to purchase a completely separate dedicated pole pruner. The attachment connects and disconnects quickly, allowing you to switch between available EZ Reach heads as the job demands.
What Is the Ryobi EZ Reach System?
The Ryobi EZ Reach system is a modular outdoor power tool platform built around a single 18V ONE+ power head and an expandable pole. Different tool heads, including hedge trimmers, blowers, edgers, and this pruning saw, attach to the same power head and pole, meaning one battery and one power source drives an entire range of outdoor tools. This attachment is the pruning saw head for that system.
Only Power Head Required
Compatible EZ Reach Power Heads Required
This is an attachment head and does not operate independently. It requires a compatible Ryobi EZ Reach expandable power head and shaft to function. Compatible power heads include the Ryobi 18V ONE+ EZ Reach Multi-Tool Power Head (sold separately). If you already own a compatible EZ Reach power head, this attachment connects directly with no additional hardware required.
Ground-Level Operation
Reach and cut branches up to 3.5 metres high without leaving the ground. Eliminates the need for ladders, elevated platforms, or climbing, significantly reducing the risk associated with overhead pruning work.
10 Inch Bar and Chain
The 10 inch cutting bar handles branches up to approximately 20cm in diameter, covering the full range of common overhead pruning and branch removal tasks in residential gardens and rural properties.
Quick-Connect Attachment
Connects to the EZ Reach power head and pole in seconds without tools. Switch between different EZ Reach attachments quickly to move between pruning, hedge trimming, and other tasks using the same power head.
Automatic Chain Oiler
Continuously lubricates the bar and chain during operation to reduce wear, extend chain life, and maintain consistent cutting performance throughout extended pruning sessions.
Low Kickback Design
The bar and chain combination is designed to minimise kickback during cutting. At extended reach above head height, kickback management is especially important for operator safety and control.
Part of a Modular System
Rather than buying a dedicated single-purpose pole pruner, the EZ Reach system lets one power head drive multiple attachments. This attachment adds pole pruning capability to an existing EZ Reach setup at a lower cost than a standalone tool.
ONE+
Part of the Ryobi 18V ONE+ System
This attachment is powered by any Ryobi 18V ONE+ battery via a compatible EZ Reach power head. Your existing 18V ONE+ batteries and chargers work across the full EZ Reach system and the broader Ryobi 18V tool range.
| Battery Voltage | 18V (via compatible EZ Reach power head) |
| Attachment Type | EZ Reach pole pruner head |
| Guide Bar Length | 10 inches (approx. 25cm) |
| Max Cutting Diameter | Approx. 20cm |
| Max Reach Height | Approx. 3.5 metres (with compatible pole) |
| Chain Oiler | Automatic |
| Attachment Connection | EZ Reach quick-connect (tool-free) |
| Power Head Required | Yes (sold separately) |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries (via power head) |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi EZ Reach Pole Pruner Attachment head
- 10 inch bar and chain pre-fitted
- Bar cover / scabbard
- User manual
Original: $127.96
-65%$127.96
$44.79Ryobi 18V ONE+ EZ Reach Pole Pruner Attachment 10” Tool Only - for High Branches
Ryobi 18V ONE+ EZ Reach
Pole Pruner Attachment 10"
Cut high branches safely from the ground. The 10 inch bar and chain attachment connects to any compatible Ryobi EZ Reach power head and extends your cutting reach up to 3.5 metres, keeping your feet firmly planted while getting the job done cleanly overhead.
The Ryobi 18V ONE+ EZ Reach Pole Pruner Attachment is a 10 inch bar and chain head designed to work with the Ryobi EZ Reach expandable power head system. It mounts to the end of the EZ Reach pole and allows you to cut branches up to approximately 20cm in diameter at heights of up to 3.5 metres, all from a safe standing position at ground level.
This is an attachment only. It requires a compatible Ryobi EZ Reach power head and pole to operate. If you already own a Ryobi EZ Reach power head, this attachment expands your system with pruning saw capability without the need to purchase a completely separate dedicated pole pruner. The attachment connects and disconnects quickly, allowing you to switch between available EZ Reach heads as the job demands.
What Is the Ryobi EZ Reach System?
The Ryobi EZ Reach system is a modular outdoor power tool platform built around a single 18V ONE+ power head and an expandable pole. Different tool heads, including hedge trimmers, blowers, edgers, and this pruning saw, attach to the same power head and pole, meaning one battery and one power source drives an entire range of outdoor tools. This attachment is the pruning saw head for that system.
Only Power Head Required
Compatible EZ Reach Power Heads Required
This is an attachment head and does not operate independently. It requires a compatible Ryobi EZ Reach expandable power head and shaft to function. Compatible power heads include the Ryobi 18V ONE+ EZ Reach Multi-Tool Power Head (sold separately). If you already own a compatible EZ Reach power head, this attachment connects directly with no additional hardware required.
Ground-Level Operation
Reach and cut branches up to 3.5 metres high without leaving the ground. Eliminates the need for ladders, elevated platforms, or climbing, significantly reducing the risk associated with overhead pruning work.
10 Inch Bar and Chain
The 10 inch cutting bar handles branches up to approximately 20cm in diameter, covering the full range of common overhead pruning and branch removal tasks in residential gardens and rural properties.
Quick-Connect Attachment
Connects to the EZ Reach power head and pole in seconds without tools. Switch between different EZ Reach attachments quickly to move between pruning, hedge trimming, and other tasks using the same power head.
Automatic Chain Oiler
Continuously lubricates the bar and chain during operation to reduce wear, extend chain life, and maintain consistent cutting performance throughout extended pruning sessions.
Low Kickback Design
The bar and chain combination is designed to minimise kickback during cutting. At extended reach above head height, kickback management is especially important for operator safety and control.
Part of a Modular System
Rather than buying a dedicated single-purpose pole pruner, the EZ Reach system lets one power head drive multiple attachments. This attachment adds pole pruning capability to an existing EZ Reach setup at a lower cost than a standalone tool.
ONE+
Part of the Ryobi 18V ONE+ System
This attachment is powered by any Ryobi 18V ONE+ battery via a compatible EZ Reach power head. Your existing 18V ONE+ batteries and chargers work across the full EZ Reach system and the broader Ryobi 18V tool range.
| Battery Voltage | 18V (via compatible EZ Reach power head) |
| Attachment Type | EZ Reach pole pruner head |
| Guide Bar Length | 10 inches (approx. 25cm) |
| Max Cutting Diameter | Approx. 20cm |
| Max Reach Height | Approx. 3.5 metres (with compatible pole) |
| Chain Oiler | Automatic |
| Attachment Connection | EZ Reach quick-connect (tool-free) |
| Power Head Required | Yes (sold separately) |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries (via power head) |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi EZ Reach Pole Pruner Attachment head
- 10 inch bar and chain pre-fitted
- Bar cover / scabbard
- User manual
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ryobi 18V ONE+ EZ Reach
Pole Pruner Attachment 10"
Cut high branches safely from the ground. The 10 inch bar and chain attachment connects to any compatible Ryobi EZ Reach power head and extends your cutting reach up to 3.5 metres, keeping your feet firmly planted while getting the job done cleanly overhead.
The Ryobi 18V ONE+ EZ Reach Pole Pruner Attachment is a 10 inch bar and chain head designed to work with the Ryobi EZ Reach expandable power head system. It mounts to the end of the EZ Reach pole and allows you to cut branches up to approximately 20cm in diameter at heights of up to 3.5 metres, all from a safe standing position at ground level.
This is an attachment only. It requires a compatible Ryobi EZ Reach power head and pole to operate. If you already own a Ryobi EZ Reach power head, this attachment expands your system with pruning saw capability without the need to purchase a completely separate dedicated pole pruner. The attachment connects and disconnects quickly, allowing you to switch between available EZ Reach heads as the job demands.
What Is the Ryobi EZ Reach System?
The Ryobi EZ Reach system is a modular outdoor power tool platform built around a single 18V ONE+ power head and an expandable pole. Different tool heads, including hedge trimmers, blowers, edgers, and this pruning saw, attach to the same power head and pole, meaning one battery and one power source drives an entire range of outdoor tools. This attachment is the pruning saw head for that system.
Only Power Head Required
Compatible EZ Reach Power Heads Required
This is an attachment head and does not operate independently. It requires a compatible Ryobi EZ Reach expandable power head and shaft to function. Compatible power heads include the Ryobi 18V ONE+ EZ Reach Multi-Tool Power Head (sold separately). If you already own a compatible EZ Reach power head, this attachment connects directly with no additional hardware required.
Ground-Level Operation
Reach and cut branches up to 3.5 metres high without leaving the ground. Eliminates the need for ladders, elevated platforms, or climbing, significantly reducing the risk associated with overhead pruning work.
10 Inch Bar and Chain
The 10 inch cutting bar handles branches up to approximately 20cm in diameter, covering the full range of common overhead pruning and branch removal tasks in residential gardens and rural properties.
Quick-Connect Attachment
Connects to the EZ Reach power head and pole in seconds without tools. Switch between different EZ Reach attachments quickly to move between pruning, hedge trimming, and other tasks using the same power head.
Automatic Chain Oiler
Continuously lubricates the bar and chain during operation to reduce wear, extend chain life, and maintain consistent cutting performance throughout extended pruning sessions.
Low Kickback Design
The bar and chain combination is designed to minimise kickback during cutting. At extended reach above head height, kickback management is especially important for operator safety and control.
Part of a Modular System
Rather than buying a dedicated single-purpose pole pruner, the EZ Reach system lets one power head drive multiple attachments. This attachment adds pole pruning capability to an existing EZ Reach setup at a lower cost than a standalone tool.
ONE+
Part of the Ryobi 18V ONE+ System
This attachment is powered by any Ryobi 18V ONE+ battery via a compatible EZ Reach power head. Your existing 18V ONE+ batteries and chargers work across the full EZ Reach system and the broader Ryobi 18V tool range.
| Battery Voltage | 18V (via compatible EZ Reach power head) |
| Attachment Type | EZ Reach pole pruner head |
| Guide Bar Length | 10 inches (approx. 25cm) |
| Max Cutting Diameter | Approx. 20cm |
| Max Reach Height | Approx. 3.5 metres (with compatible pole) |
| Chain Oiler | Automatic |
| Attachment Connection | EZ Reach quick-connect (tool-free) |
| Power Head Required | Yes (sold separately) |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries (via power head) |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi EZ Reach Pole Pruner Attachment head
- 10 inch bar and chain pre-fitted
- Bar cover / scabbard
- User manual
