Ryobi 18V ONE+ HP Transfer Pump 2,271L/hr Tool Only - for Fast Water Transfer
Ryobi 18V ONE+ HP Transfer Pump
2,271 L/hr Tool Only
A brushless-powered transfer pump built for fast, clean water movement. Whether you're topping up a tank, draining a pool, or redirecting water across the property, the HP motor delivers consistent high-volume flow without the cords or the noise of a petrol pump.
The Ryobi 18V ONE+ HP Transfer Pump is a high-performance, brushless cordless pump designed for efficient water transfer across a wide range of residential, agricultural, and worksite applications. With a flow rate of 2,271 litres per hour, it moves large volumes of clean water quickly and reliably, powered entirely by your existing Ryobi 18V ONE+ battery.
Unlike the submersible pump in the Ryobi range, this transfer pump is designed for above-ground use, drawing water from a source such as a tank, dam, pool, or rainwater system and pushing it where it needs to go. It's a purpose-built tool for water transfer tasks where speed, portability, and freedom from mains power are priorities.
This Transfer Pump
- Above-ground operation
- Draws from a water source via inlet hose
- Ideal for clean water transfer between locations
- Tanks, dams, pools, rainwater systems
- Designed for directed, controlled water movement
- Brushless HP motor for sustained performance
Submersible Pump
- Sits inside the water source
- Designed to remove water from a flooded area
- Ideal for drainage and water removal tasks
- Flooded spaces, pools, sumps, bilges
- Handles dirty water with fine particles
- Higher flow rate for rapid water removal
2,271 L/hr Flow Rate
High-volume water transfer that moves serious amounts of water in a short time. Fill a 1,000 litre tank in under 30 minutes under ideal conditions.
Fully Cordless Operation
Powered by any Ryobi 18V ONE+ battery, it operates anywhere without extension cords or a generator. Ideal for rural properties, large gardens, and remote sites.
25mm Inlet and Outlet
Standard 25mm hose fittings for straightforward connection to garden hose systems and standard irrigation fittings. No adaptors required for most setups.
Self-Priming Capable
Primes quickly without needing the pump body to be manually filled before each use, saving time when setting up at a new location or after dry storage.
Compact and Easy to Position
Lightweight enough to move by hand and position close to the water source. No fixed installation required. Set it up in minutes and reposition as the job demands.
Clean Water Design
Engineered specifically for clean water transfer. The impeller and pump housing are optimised for clear water applications, delivering consistent performance without risk of clogging from clean sources.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries. For extended transfer sessions, a high-capacity battery such as a 5Ah or 9Ah pack is recommended to maximise runtime and keep the water flowing without interruption.
| Battery Voltage | 18V (Ryobi ONE+) |
| Motor Type | Brushless (HP Series) |
| Flow Rate (Max) | 2,271 L/hr |
| Pump Type | Transfer (above-ground) |
| Water Type | Clean water only |
| Inlet / Outlet Size | 25mm (1 inch) |
| Self-Priming | Yes |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi 18V ONE+ HP Transfer Pump (Tool Body)
- User manual
Original: $181.46
-65%$181.46
$63.51Ryobi 18V ONE+ HP Transfer Pump 2,271L/hr Tool Only - for Fast Water Transfer
Ryobi 18V ONE+ HP Transfer Pump
2,271 L/hr Tool Only
A brushless-powered transfer pump built for fast, clean water movement. Whether you're topping up a tank, draining a pool, or redirecting water across the property, the HP motor delivers consistent high-volume flow without the cords or the noise of a petrol pump.
The Ryobi 18V ONE+ HP Transfer Pump is a high-performance, brushless cordless pump designed for efficient water transfer across a wide range of residential, agricultural, and worksite applications. With a flow rate of 2,271 litres per hour, it moves large volumes of clean water quickly and reliably, powered entirely by your existing Ryobi 18V ONE+ battery.
Unlike the submersible pump in the Ryobi range, this transfer pump is designed for above-ground use, drawing water from a source such as a tank, dam, pool, or rainwater system and pushing it where it needs to go. It's a purpose-built tool for water transfer tasks where speed, portability, and freedom from mains power are priorities.
This Transfer Pump
- Above-ground operation
- Draws from a water source via inlet hose
- Ideal for clean water transfer between locations
- Tanks, dams, pools, rainwater systems
- Designed for directed, controlled water movement
- Brushless HP motor for sustained performance
Submersible Pump
- Sits inside the water source
- Designed to remove water from a flooded area
- Ideal for drainage and water removal tasks
- Flooded spaces, pools, sumps, bilges
- Handles dirty water with fine particles
- Higher flow rate for rapid water removal
2,271 L/hr Flow Rate
High-volume water transfer that moves serious amounts of water in a short time. Fill a 1,000 litre tank in under 30 minutes under ideal conditions.
Fully Cordless Operation
Powered by any Ryobi 18V ONE+ battery, it operates anywhere without extension cords or a generator. Ideal for rural properties, large gardens, and remote sites.
25mm Inlet and Outlet
Standard 25mm hose fittings for straightforward connection to garden hose systems and standard irrigation fittings. No adaptors required for most setups.
Self-Priming Capable
Primes quickly without needing the pump body to be manually filled before each use, saving time when setting up at a new location or after dry storage.
Compact and Easy to Position
Lightweight enough to move by hand and position close to the water source. No fixed installation required. Set it up in minutes and reposition as the job demands.
Clean Water Design
Engineered specifically for clean water transfer. The impeller and pump housing are optimised for clear water applications, delivering consistent performance without risk of clogging from clean sources.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries. For extended transfer sessions, a high-capacity battery such as a 5Ah or 9Ah pack is recommended to maximise runtime and keep the water flowing without interruption.
| Battery Voltage | 18V (Ryobi ONE+) |
| Motor Type | Brushless (HP Series) |
| Flow Rate (Max) | 2,271 L/hr |
| Pump Type | Transfer (above-ground) |
| Water Type | Clean water only |
| Inlet / Outlet Size | 25mm (1 inch) |
| Self-Priming | Yes |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi 18V ONE+ HP Transfer Pump (Tool Body)
- User manual
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ryobi 18V ONE+ HP Transfer Pump
2,271 L/hr Tool Only
A brushless-powered transfer pump built for fast, clean water movement. Whether you're topping up a tank, draining a pool, or redirecting water across the property, the HP motor delivers consistent high-volume flow without the cords or the noise of a petrol pump.
The Ryobi 18V ONE+ HP Transfer Pump is a high-performance, brushless cordless pump designed for efficient water transfer across a wide range of residential, agricultural, and worksite applications. With a flow rate of 2,271 litres per hour, it moves large volumes of clean water quickly and reliably, powered entirely by your existing Ryobi 18V ONE+ battery.
Unlike the submersible pump in the Ryobi range, this transfer pump is designed for above-ground use, drawing water from a source such as a tank, dam, pool, or rainwater system and pushing it where it needs to go. It's a purpose-built tool for water transfer tasks where speed, portability, and freedom from mains power are priorities.
This Transfer Pump
- Above-ground operation
- Draws from a water source via inlet hose
- Ideal for clean water transfer between locations
- Tanks, dams, pools, rainwater systems
- Designed for directed, controlled water movement
- Brushless HP motor for sustained performance
Submersible Pump
- Sits inside the water source
- Designed to remove water from a flooded area
- Ideal for drainage and water removal tasks
- Flooded spaces, pools, sumps, bilges
- Handles dirty water with fine particles
- Higher flow rate for rapid water removal
2,271 L/hr Flow Rate
High-volume water transfer that moves serious amounts of water in a short time. Fill a 1,000 litre tank in under 30 minutes under ideal conditions.
Fully Cordless Operation
Powered by any Ryobi 18V ONE+ battery, it operates anywhere without extension cords or a generator. Ideal for rural properties, large gardens, and remote sites.
25mm Inlet and Outlet
Standard 25mm hose fittings for straightforward connection to garden hose systems and standard irrigation fittings. No adaptors required for most setups.
Self-Priming Capable
Primes quickly without needing the pump body to be manually filled before each use, saving time when setting up at a new location or after dry storage.
Compact and Easy to Position
Lightweight enough to move by hand and position close to the water source. No fixed installation required. Set it up in minutes and reposition as the job demands.
Clean Water Design
Engineered specifically for clean water transfer. The impeller and pump housing are optimised for clear water applications, delivering consistent performance without risk of clogging from clean sources.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries. For extended transfer sessions, a high-capacity battery such as a 5Ah or 9Ah pack is recommended to maximise runtime and keep the water flowing without interruption.
| Battery Voltage | 18V (Ryobi ONE+) |
| Motor Type | Brushless (HP Series) |
| Flow Rate (Max) | 2,271 L/hr |
| Pump Type | Transfer (above-ground) |
| Water Type | Clean water only |
| Inlet / Outlet Size | 25mm (1 inch) |
| Self-Priming | Yes |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi 18V ONE+ HP Transfer Pump (Tool Body)
- User manual
