Ryobi 18V ONE+ Impact Driver RID18 Tool Only - for High Torque Fastening
Ryobi 18V ONE+ Impact Driver
RID18 Tool Only
A compact, high-torque cordless impact driver that drives screws faster and with less effort than any standard drill driver. The percussive impact mechanism delivers up to 180Nm of torque without transferring twist back to your wrist, making it the preferred fastening tool on site and in the workshop.
The Ryobi RID18 is an 18V ONE+ cordless impact driver built for high-volume fastening work where speed, torque, and low operator fatigue matter. Unlike a standard drill driver that transfers rotational force directly through the chuck, the impact driver uses a percussive hammering mechanism that fires up to 3,200 times per minute to break through resistance in tough fastening applications. The result is more torque delivered to the fastener with significantly less strain on the user's wrist and arm.
With 180Nm of maximum torque and a compact, lightweight body, the RID18 drives long deck screws, structural timber screws, and machine bolts with ease and drives them flush consistently without cam-out or stripped heads. It accepts all standard 1/4 inch hex shank bits and is compact enough to reach into tight spaces where a full-size drill cannot fit.
This Impact Driver
- Percussive impact mechanism for high torque output
- Up to 180Nm with no wrist strain on the operator
- Drives long and large fasteners without stalling
- Accepts 1/4 inch hex shank bits only
- Compact and lightweight for tight spaces
- Best for screwdriving and fastening tasks
Standard Drill Driver
- Direct rotational torque through the chuck
- More torque transfers back to the user's wrist
- Adjustable clutch for delicate fastening work
- Accepts round and hex shank bits via keyless chuck
- Better suited to drilling holes in all materials
- More versatile for mixed drilling and driving tasks
180Nm Impact Torque
Drives 100mm structural timber screws, coach bolts, and deck screws into hardwood without pre-drilling. The impact mechanism does the hard work so the operator doesn't have to fight the tool through every fastener.
3-Speed Variable Control
Three speed and torque settings let you match the tool to the task. Low speed for precision driving in delicate materials, medium for general work, and high for maximum torque in tough structural applications.
Compact, Lightweight Body
The short body length and low weight make it easy to drive fasteners in tight wall cavities, between studs, inside cabinetry, and in any confined space where a longer drill driver would not fit.
1/4 Inch Quick-Release Chuck
Accepts all standard 1/4 inch hex shank driver bits. The quick-release mechanism allows tool-free bit changes in seconds. Compatible with the full range of impact-rated hex shank bits available in Australia.
LED Work Light
The built-in LED illuminates the fastening point every time the trigger is pulled. Useful in wall cavities, roof spaces, under benches, and on dimly lit job sites where visibility around the fastener matters.
Belt Clip Included
The onboard belt clip lets you hang the driver on your belt or a ladder rung when both hands are needed for other tasks. A small detail that makes a practical difference across a long day on site.
Use Impact-Rated Bits for Best Results
The RID18 accepts all standard 1/4 inch hex shank driver bits. For heavy fastening work, impact-rated bits are strongly recommended over standard driver bits. Impact-rated bits are manufactured from torsion steel that flexes under the repeated hammering action, lasting significantly longer than standard chrome vanadium bits in an impact driver. Using non-rated bits in an impact driver will shorten bit life considerably and can lead to bit breakage under load.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries and chargers. If you already own a Ryobi 18V ONE+ drill driver or any other 18V ONE+ tool, your existing batteries power this impact driver directly. No additional battery investment required.
| Model Number | RID18 |
| Battery Voltage | 18V (Ryobi ONE+) |
| Max Torque | 180Nm |
| No-Load Speed | 0 to 2,900 RPM |
| Impacts Per Minute | 0 to 3,200 IPM |
| Speed Settings | 3 |
| Chuck Type | 1/4 inch quick-release hex |
| LED Work Light | Yes |
| Belt Clip | Yes (included) |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi RID18 Impact Driver (Tool Only)
- Belt clip
- User manual
Original: $63.62
-65%$63.62
$22.27Ryobi 18V ONE+ Impact Driver RID18 Tool Only - for High Torque Fastening
Ryobi 18V ONE+ Impact Driver
RID18 Tool Only
A compact, high-torque cordless impact driver that drives screws faster and with less effort than any standard drill driver. The percussive impact mechanism delivers up to 180Nm of torque without transferring twist back to your wrist, making it the preferred fastening tool on site and in the workshop.
The Ryobi RID18 is an 18V ONE+ cordless impact driver built for high-volume fastening work where speed, torque, and low operator fatigue matter. Unlike a standard drill driver that transfers rotational force directly through the chuck, the impact driver uses a percussive hammering mechanism that fires up to 3,200 times per minute to break through resistance in tough fastening applications. The result is more torque delivered to the fastener with significantly less strain on the user's wrist and arm.
With 180Nm of maximum torque and a compact, lightweight body, the RID18 drives long deck screws, structural timber screws, and machine bolts with ease and drives them flush consistently without cam-out or stripped heads. It accepts all standard 1/4 inch hex shank bits and is compact enough to reach into tight spaces where a full-size drill cannot fit.
This Impact Driver
- Percussive impact mechanism for high torque output
- Up to 180Nm with no wrist strain on the operator
- Drives long and large fasteners without stalling
- Accepts 1/4 inch hex shank bits only
- Compact and lightweight for tight spaces
- Best for screwdriving and fastening tasks
Standard Drill Driver
- Direct rotational torque through the chuck
- More torque transfers back to the user's wrist
- Adjustable clutch for delicate fastening work
- Accepts round and hex shank bits via keyless chuck
- Better suited to drilling holes in all materials
- More versatile for mixed drilling and driving tasks
180Nm Impact Torque
Drives 100mm structural timber screws, coach bolts, and deck screws into hardwood without pre-drilling. The impact mechanism does the hard work so the operator doesn't have to fight the tool through every fastener.
3-Speed Variable Control
Three speed and torque settings let you match the tool to the task. Low speed for precision driving in delicate materials, medium for general work, and high for maximum torque in tough structural applications.
Compact, Lightweight Body
The short body length and low weight make it easy to drive fasteners in tight wall cavities, between studs, inside cabinetry, and in any confined space where a longer drill driver would not fit.
1/4 Inch Quick-Release Chuck
Accepts all standard 1/4 inch hex shank driver bits. The quick-release mechanism allows tool-free bit changes in seconds. Compatible with the full range of impact-rated hex shank bits available in Australia.
LED Work Light
The built-in LED illuminates the fastening point every time the trigger is pulled. Useful in wall cavities, roof spaces, under benches, and on dimly lit job sites where visibility around the fastener matters.
Belt Clip Included
The onboard belt clip lets you hang the driver on your belt or a ladder rung when both hands are needed for other tasks. A small detail that makes a practical difference across a long day on site.
Use Impact-Rated Bits for Best Results
The RID18 accepts all standard 1/4 inch hex shank driver bits. For heavy fastening work, impact-rated bits are strongly recommended over standard driver bits. Impact-rated bits are manufactured from torsion steel that flexes under the repeated hammering action, lasting significantly longer than standard chrome vanadium bits in an impact driver. Using non-rated bits in an impact driver will shorten bit life considerably and can lead to bit breakage under load.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries and chargers. If you already own a Ryobi 18V ONE+ drill driver or any other 18V ONE+ tool, your existing batteries power this impact driver directly. No additional battery investment required.
| Model Number | RID18 |
| Battery Voltage | 18V (Ryobi ONE+) |
| Max Torque | 180Nm |
| No-Load Speed | 0 to 2,900 RPM |
| Impacts Per Minute | 0 to 3,200 IPM |
| Speed Settings | 3 |
| Chuck Type | 1/4 inch quick-release hex |
| LED Work Light | Yes |
| Belt Clip | Yes (included) |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi RID18 Impact Driver (Tool Only)
- Belt clip
- User manual
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ryobi 18V ONE+ Impact Driver
RID18 Tool Only
A compact, high-torque cordless impact driver that drives screws faster and with less effort than any standard drill driver. The percussive impact mechanism delivers up to 180Nm of torque without transferring twist back to your wrist, making it the preferred fastening tool on site and in the workshop.
The Ryobi RID18 is an 18V ONE+ cordless impact driver built for high-volume fastening work where speed, torque, and low operator fatigue matter. Unlike a standard drill driver that transfers rotational force directly through the chuck, the impact driver uses a percussive hammering mechanism that fires up to 3,200 times per minute to break through resistance in tough fastening applications. The result is more torque delivered to the fastener with significantly less strain on the user's wrist and arm.
With 180Nm of maximum torque and a compact, lightweight body, the RID18 drives long deck screws, structural timber screws, and machine bolts with ease and drives them flush consistently without cam-out or stripped heads. It accepts all standard 1/4 inch hex shank bits and is compact enough to reach into tight spaces where a full-size drill cannot fit.
This Impact Driver
- Percussive impact mechanism for high torque output
- Up to 180Nm with no wrist strain on the operator
- Drives long and large fasteners without stalling
- Accepts 1/4 inch hex shank bits only
- Compact and lightweight for tight spaces
- Best for screwdriving and fastening tasks
Standard Drill Driver
- Direct rotational torque through the chuck
- More torque transfers back to the user's wrist
- Adjustable clutch for delicate fastening work
- Accepts round and hex shank bits via keyless chuck
- Better suited to drilling holes in all materials
- More versatile for mixed drilling and driving tasks
180Nm Impact Torque
Drives 100mm structural timber screws, coach bolts, and deck screws into hardwood without pre-drilling. The impact mechanism does the hard work so the operator doesn't have to fight the tool through every fastener.
3-Speed Variable Control
Three speed and torque settings let you match the tool to the task. Low speed for precision driving in delicate materials, medium for general work, and high for maximum torque in tough structural applications.
Compact, Lightweight Body
The short body length and low weight make it easy to drive fasteners in tight wall cavities, between studs, inside cabinetry, and in any confined space where a longer drill driver would not fit.
1/4 Inch Quick-Release Chuck
Accepts all standard 1/4 inch hex shank driver bits. The quick-release mechanism allows tool-free bit changes in seconds. Compatible with the full range of impact-rated hex shank bits available in Australia.
LED Work Light
The built-in LED illuminates the fastening point every time the trigger is pulled. Useful in wall cavities, roof spaces, under benches, and on dimly lit job sites where visibility around the fastener matters.
Belt Clip Included
The onboard belt clip lets you hang the driver on your belt or a ladder rung when both hands are needed for other tasks. A small detail that makes a practical difference across a long day on site.
Use Impact-Rated Bits for Best Results
The RID18 accepts all standard 1/4 inch hex shank driver bits. For heavy fastening work, impact-rated bits are strongly recommended over standard driver bits. Impact-rated bits are manufactured from torsion steel that flexes under the repeated hammering action, lasting significantly longer than standard chrome vanadium bits in an impact driver. Using non-rated bits in an impact driver will shorten bit life considerably and can lead to bit breakage under load.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries and chargers. If you already own a Ryobi 18V ONE+ drill driver or any other 18V ONE+ tool, your existing batteries power this impact driver directly. No additional battery investment required.
| Model Number | RID18 |
| Battery Voltage | 18V (Ryobi ONE+) |
| Max Torque | 180Nm |
| No-Load Speed | 0 to 2,900 RPM |
| Impacts Per Minute | 0 to 3,200 IPM |
| Speed Settings | 3 |
| Chuck Type | 1/4 inch quick-release hex |
| LED Work Light | Yes |
| Belt Clip | Yes (included) |
| Battery Included | No (Tool Only) |
| Charger Included | No (Tool Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi RID18 Impact Driver (Tool Only)
- Belt clip
- User manual
