Ryobi 18V ONE+ Trim Router R18TR2-0 Skin Only for Edge Profiling
Ryobi 18V ONE+ Trim Router
Skin Only for Edge Profiling
A compact, cordless trim router that brings professional edge profiling and decorative routing to any job site or workshop without the tether of a power cord. Lightweight, precise, and compatible with the full range of standard 1/4 inch router bits.
The Ryobi R18TR2-0 is an 18V ONE+ cordless trim router built for edge profiling, decorative routing, and template work on timber, MDF, laminate, and other common woodworking materials. It accepts all standard 1/4 inch shank router bits, giving you access to a wide range of profiles and cutting options straight out of the box.
With variable speed control up to 30,000 RPM, a micro-depth adjustment dial for precise cutting depth, and a comfortable ergonomic grip, the R18TR2-0 gives carpenters, cabinet makers, furniture builders, and dedicated DIYers the accuracy they need without the bulk or cord of a full-size router. The cordless format makes it particularly effective for on-site trim work and jobs where power point access is limited.
Produce a smooth, rounded edge profile on timber and panel edges. One of the most common trim routing tasks for furniture and cabinetry.
Cut a clean angled bevel on edges for a refined, modern look or to remove sharp corners on benchtops, shelves, and frames.
Trim laminate or veneer flush to a substrate using a bearing-guided bit. Essential for laminate benchtop and edge banding work.
Create a concave curved profile along an edge, commonly used for decorative trim, skirting, and furniture detailing.
Classic decorative edge profiles combining curves and shoulders, used for traditional furniture, picture frames, and architrave work.
Cut grooves, dadoes, and rebates in timber and sheet materials. Also used for template routing and inlay work.
Variable Speed Dial
Six-step speed control from low to 30,000 RPM lets you dial in the right speed for the material and bit in use. Slower speeds for larger bits and harder materials, higher speeds for fine profiling work.
Micro-Depth Adjustment
The threaded depth adjustment collar allows precise depth setting without tools. Make fine adjustments on the fly and lock them in securely for consistent results across long runs.
1/4 Inch Collet
Accepts all standard 1/4 inch shank router bits, the most widely available size on the market. Compatible with bits from Ryobi and virtually all major router bit brands sold in Australia.
Clear Sub-Base
The transparent base plate lets you see exactly where the bit is cutting at all times. Significantly improves accuracy when following a line, template, or edge guide.
Ergonomic Grip
Compact and well-balanced form factor with a comfortable grip that reduces fatigue during extended profiling sessions. Easy to handle one-handed for many trim routing tasks.
Cordless Freedom
No power cord to manage means you can move freely around a workpiece or across a job site. Particularly valuable when profiling long runs of decking, skirting, or cabinetry panels.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries and chargers. If you already own Ryobi 18V tools, your existing batteries work with this router straight away. No additional investment in the battery platform required.
| Model Number | R18TR2-0 |
| Battery Voltage | 18V (Ryobi ONE+) |
| No-Load Speed | 10,000 to 30,000 RPM (6-step) |
| Collet Size | 1/4 inch (6.35mm) |
| Depth Adjustment | Micro-adjust threaded collar |
| Base | Clear sub-base for line-of-sight visibility |
| Max Cutting Depth | 35mm |
| Battery Included | No (Skin Only) |
| Charger Included | No (Skin Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi R18TR2-0 Trim Router (Skin Only)
- Clear sub-base plate
- 1/4 inch collet and nut
- Collet wrench
- Dust port adapter
- User manual
Original: $127.96
-65%$127.96
$44.79Ryobi 18V ONE+ Trim Router R18TR2-0 Skin Only for Edge Profiling
Ryobi 18V ONE+ Trim Router
Skin Only for Edge Profiling
A compact, cordless trim router that brings professional edge profiling and decorative routing to any job site or workshop without the tether of a power cord. Lightweight, precise, and compatible with the full range of standard 1/4 inch router bits.
The Ryobi R18TR2-0 is an 18V ONE+ cordless trim router built for edge profiling, decorative routing, and template work on timber, MDF, laminate, and other common woodworking materials. It accepts all standard 1/4 inch shank router bits, giving you access to a wide range of profiles and cutting options straight out of the box.
With variable speed control up to 30,000 RPM, a micro-depth adjustment dial for precise cutting depth, and a comfortable ergonomic grip, the R18TR2-0 gives carpenters, cabinet makers, furniture builders, and dedicated DIYers the accuracy they need without the bulk or cord of a full-size router. The cordless format makes it particularly effective for on-site trim work and jobs where power point access is limited.
Produce a smooth, rounded edge profile on timber and panel edges. One of the most common trim routing tasks for furniture and cabinetry.
Cut a clean angled bevel on edges for a refined, modern look or to remove sharp corners on benchtops, shelves, and frames.
Trim laminate or veneer flush to a substrate using a bearing-guided bit. Essential for laminate benchtop and edge banding work.
Create a concave curved profile along an edge, commonly used for decorative trim, skirting, and furniture detailing.
Classic decorative edge profiles combining curves and shoulders, used for traditional furniture, picture frames, and architrave work.
Cut grooves, dadoes, and rebates in timber and sheet materials. Also used for template routing and inlay work.
Variable Speed Dial
Six-step speed control from low to 30,000 RPM lets you dial in the right speed for the material and bit in use. Slower speeds for larger bits and harder materials, higher speeds for fine profiling work.
Micro-Depth Adjustment
The threaded depth adjustment collar allows precise depth setting without tools. Make fine adjustments on the fly and lock them in securely for consistent results across long runs.
1/4 Inch Collet
Accepts all standard 1/4 inch shank router bits, the most widely available size on the market. Compatible with bits from Ryobi and virtually all major router bit brands sold in Australia.
Clear Sub-Base
The transparent base plate lets you see exactly where the bit is cutting at all times. Significantly improves accuracy when following a line, template, or edge guide.
Ergonomic Grip
Compact and well-balanced form factor with a comfortable grip that reduces fatigue during extended profiling sessions. Easy to handle one-handed for many trim routing tasks.
Cordless Freedom
No power cord to manage means you can move freely around a workpiece or across a job site. Particularly valuable when profiling long runs of decking, skirting, or cabinetry panels.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries and chargers. If you already own Ryobi 18V tools, your existing batteries work with this router straight away. No additional investment in the battery platform required.
| Model Number | R18TR2-0 |
| Battery Voltage | 18V (Ryobi ONE+) |
| No-Load Speed | 10,000 to 30,000 RPM (6-step) |
| Collet Size | 1/4 inch (6.35mm) |
| Depth Adjustment | Micro-adjust threaded collar |
| Base | Clear sub-base for line-of-sight visibility |
| Max Cutting Depth | 35mm |
| Battery Included | No (Skin Only) |
| Charger Included | No (Skin Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi R18TR2-0 Trim Router (Skin Only)
- Clear sub-base plate
- 1/4 inch collet and nut
- Collet wrench
- Dust port adapter
- User manual
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ryobi 18V ONE+ Trim Router
Skin Only for Edge Profiling
A compact, cordless trim router that brings professional edge profiling and decorative routing to any job site or workshop without the tether of a power cord. Lightweight, precise, and compatible with the full range of standard 1/4 inch router bits.
The Ryobi R18TR2-0 is an 18V ONE+ cordless trim router built for edge profiling, decorative routing, and template work on timber, MDF, laminate, and other common woodworking materials. It accepts all standard 1/4 inch shank router bits, giving you access to a wide range of profiles and cutting options straight out of the box.
With variable speed control up to 30,000 RPM, a micro-depth adjustment dial for precise cutting depth, and a comfortable ergonomic grip, the R18TR2-0 gives carpenters, cabinet makers, furniture builders, and dedicated DIYers the accuracy they need without the bulk or cord of a full-size router. The cordless format makes it particularly effective for on-site trim work and jobs where power point access is limited.
Produce a smooth, rounded edge profile on timber and panel edges. One of the most common trim routing tasks for furniture and cabinetry.
Cut a clean angled bevel on edges for a refined, modern look or to remove sharp corners on benchtops, shelves, and frames.
Trim laminate or veneer flush to a substrate using a bearing-guided bit. Essential for laminate benchtop and edge banding work.
Create a concave curved profile along an edge, commonly used for decorative trim, skirting, and furniture detailing.
Classic decorative edge profiles combining curves and shoulders, used for traditional furniture, picture frames, and architrave work.
Cut grooves, dadoes, and rebates in timber and sheet materials. Also used for template routing and inlay work.
Variable Speed Dial
Six-step speed control from low to 30,000 RPM lets you dial in the right speed for the material and bit in use. Slower speeds for larger bits and harder materials, higher speeds for fine profiling work.
Micro-Depth Adjustment
The threaded depth adjustment collar allows precise depth setting without tools. Make fine adjustments on the fly and lock them in securely for consistent results across long runs.
1/4 Inch Collet
Accepts all standard 1/4 inch shank router bits, the most widely available size on the market. Compatible with bits from Ryobi and virtually all major router bit brands sold in Australia.
Clear Sub-Base
The transparent base plate lets you see exactly where the bit is cutting at all times. Significantly improves accuracy when following a line, template, or edge guide.
Ergonomic Grip
Compact and well-balanced form factor with a comfortable grip that reduces fatigue during extended profiling sessions. Easy to handle one-handed for many trim routing tasks.
Cordless Freedom
No power cord to manage means you can move freely around a workpiece or across a job site. Particularly valuable when profiling long runs of decking, skirting, or cabinetry panels.
ONE+
Part of the Ryobi 18V ONE+ System
Compatible with all Ryobi 18V ONE+ batteries and chargers. If you already own Ryobi 18V tools, your existing batteries work with this router straight away. No additional investment in the battery platform required.
| Model Number | R18TR2-0 |
| Battery Voltage | 18V (Ryobi ONE+) |
| No-Load Speed | 10,000 to 30,000 RPM (6-step) |
| Collet Size | 1/4 inch (6.35mm) |
| Depth Adjustment | Micro-adjust threaded collar |
| Base | Clear sub-base for line-of-sight visibility |
| Max Cutting Depth | 35mm |
| Battery Included | No (Skin Only) |
| Charger Included | No (Skin Only) |
| Compatible Batteries | All Ryobi 18V ONE+ batteries |
| Warranty | 3 Year Ryobi Warranty (when registered) |
- Ryobi R18TR2-0 Trim Router (Skin Only)
- Clear sub-base plate
- 1/4 inch collet and nut
- Collet wrench
- Dust port adapter
- User manual
