Selleys Autofix Windscreen Sealant Black 100ml

Selleys Auto Fix Windscreen Sealant 100 mL - Black

Stop leaks fast around windscreens and windows with a durable, weather resistant silicone seal. Selleys Auto Fix Windscreen Sealant forms a waterproof barrier that resists vibration, UV and temperature extremes, keeping water, dust and drafts out.

Why choose this sealant

• 100 percent neutral cure silicone for reliable sealing
• Forms a waterproof seal to stop leaks quickly
• UV and weather resistant for long term performance
• Skins in 5 minutes and is touch dry in about 30 minutes
• Handles joint movement up to 25 percent

Suitable surfaces

• Glass and windscreens
• Rubber surrounds and trims
• Painted surfaces and most plastics
• Metal frames and channels

Typical applications

• Sealing between windscreen glass and rubber
• Sealing between rubber and metal frames
• Stopping minor water ingress around vehicle windows
• General sealing where a flexible, black silicone finish is desired

Key specifications

Technology	Neutral cure silicone
Colour	Black
Movement capability	Up to 25 percent
Skin time	About 5 minutes
Set time	About 30 minutes
Full cure	Approximately 24 hours
Service temperature	-40°C to 180°C
Application temperature	-20°C to 50°C
VOC	26 g/L
Pack size	100 mL tube

Directions

1. Remove any dirt or moisture between the rubber and glass, or rubber and metal. Clean with mineral turpentine and allow to dry.
2. Remove cap, unscrew nozzle, pierce inner seal, refit nozzle, then cut the tip at a 45 degree angle.
3. Insert the nozzle between the rubber and glass or rubber and metal where possible. Squeeze the tube with steady pressure to push sealant into the joint. Smooth off with a gloved finger.
4. If additional smoothing is needed, do it before the sealant skins.
5. Clean up uncured sealant with mineral turpentine. Cured material must be cut or scraped away.
6. Replace the cap after use. Allow sealant in the nozzle to cure, then remove before next use.

Handy tips

• For neat lines, mask both sides of the joint and remove tape before the sealant skins.
• Best results occur when the joint is clean, dry and free of loose material.

Limitations

• Not recommended on natural rubber, NBR or chloroprene neoprene due to poor adhesion.

Clean up and storage

• Clean uncured sealant with mineral turpentine. Remove cured sealant by cutting or scraping.
• Store in a cool, dry place below 30°C. Use within 24 months of production.

What you get

• 1 x Selleys Auto Fix Windscreen Sealant 100 mL - Black